- Dual Boot Esxi And Windows 10
- Dual Boot Esxi And Windows 10 Free
- Dual Boot Esxi And Windows 10 Download
- Dual Boot Esxi And Windows 10 Without
- Dual Boot Esxi And Windows 10 Windows 10
I recently bought an Intel NUC8i7HVK to work as an ESXi host. In this post I walk you through the process of installation and initial setup.
Windows 10 Dual Boot Manager with Supremo Remote Desktop Feb 22, 2014. It is possible to use nested virtualization to run VMware ESXi as a Virtual Machine in Hyper-V. To some, this may be a viable option if you are unable to acquire any. Once the process is complete, your USB-based VMware ESXi installation media will be created and ready to boot the hypervisor setup on your server. Note: If the USB will not boot on your server. Re: manual dual boot ESXi and Windows. Golddiggie Nov 18, 2010 8:43 AM (in response to WillL) WillL wrote: I was able to run 64bit OS in Workstation 7 if I remember correctly. You can get a mediocre model of either for under $200 and they should be fine to run Windows and the VMware clients (vSphere / View).
Hardware
![Dual Boot Esxi And Windows 10 Dual Boot Esxi And Windows 10](https://lasopapacific110.weebly.com/uploads/1/2/7/1/127167016/950996485.png)
![Dual boot esxi and windows 10 download Dual boot esxi and windows 10 download](https://i.stack.imgur.com/7wdDn.png)
The NUC8i7HVK is the top-of-the-line model of the NUC kits and comes with an i7-8809G processor. It ships with neither memory nor storage, so picked up the following additional components:
- 2 x Samsung 32 GB DDR4-2666, SO-DIMM (M471A4G43MB1-CTD)
- 1 x Intel SSD 660p Series 1.0 TB, M.2 80 mm (SSDPEKNW010T8x 1)
- 1 x SanDisk Ultra Fit 16 GB (SDCZ430-016G-G46)
An interesting fact to note: in the official specs, Intel mentions 32 GB as the maximum memory size. However, with 32 GB sticks now readily available and 64 GB being listed as the maximum memory size for the i7-8809G, I gave it a shot and installed 2 x 32 GB of RAM. It worked without issues.
The 16GB USB stick listed above was intended for installing ESXi onto it (and transport some BIOS update). I used an additional “throw-away” USB stick for preparing the ESXi ISO. You can find more details in the description that follows.
Unboxing
There’s not much to say. Putting in the SSD and the RAM is a straight-forward process. The “IKEA-style” manual that comes with the NUC also shows you which screws to remove. Here are some pictures:
Preparing a bootable USB stick
You can download the ISO image of ESXI 6.7 from vmware (download is available after registration).
Fun fact: The JavaScript that makes the download button work, comes from a location typically blocked by adblockers (I’m running a Pi-Hole in my network). So, if you have
tags.tiqcdn.com
on your block list, stop wondering why the download won’t start :-)To make a bootable USB stick (any you have lying around), you essentially format the stick, copy the ESXi image onto it, and create a
syslinux.cfg
. If you are on macOS and want to skip some typing, have a look at this Makefile: https://github.com/cbednarski/vmware-usb-osx.Download latest BIOS
Your NUC probably doesn’t ship with the latest BIOS, so go to Intel’s download center to get it: https://downloadcenter.intel.com/download/28953/BIOS-Update-HNKBLi70-86A-.
Then copy the BIOS onto your “good” flash drive (in my case the SanDisk stick).
First boot
Plug the USB stick with the latest BIOS on it into the NUC and boot into the “Power Button Menu”.
This menu of the NUC can be entered by pressing the power button for 3 seconds while it is in off-state (i.e. not hybernation). From the on-screen menu, it will let you pick “Update BIOS” [F7] or enter Visual BIOS [F2]. Follow the instructions and select the BIOS from the inserted USB stick.
I didn’t have a spare screen, so you are seeing it projected against my wallpaper ?
Once the update is done, shut down the NUC, then insert the prepared stick with the ESXi ISO (in addition to the SanDisk stick). Then boot the NUC again.
Boot into ESXi installer
The NUC should now boot into the ESXi installer (if it doesn’t, go back to the BIOS and manually select the boot drive).
The install itself is pretty self-explanatory (license, keyboard layout, password, …). As the installation target, select the SanDisk stick. It will be wiped and remain in the back of the NUC for good.
After the install, there are a few things you may want to setup before moving your NUC to its final place (and in my case, disconnect it from the projector :D). Under
F2 -> Configure Management Network -> IPv4
you can set a static IP, under ... -> DNS
you can set your DNS server and hostname (if you’d like to statically assign it here).Dual Boot Esxi And Windows 10
Accessing the Web UI
Dual Boot Esxi And Windows 10 Free
If you followed along, you should now be able to access the web client by going to
https://<assigned ip>
. Have a quick look at the basic settings like Time & Date (e.g. set a ntp server), maybe enable SSH, maybe enter a license key (without it, it’s a 60 day trial. You should find a license key for the free version in your vmware account).One last tip about the SSH access: you can access the ESXi console (the one you would see when having a display connected) by running
dcui
. To pass function keys over the SSH session, find the escape sequence for the needed key by using tput
. For example tput kf2
for F2
, which could be passed as Ctrl+[OQ
.I recently bought an Intel NUC8i7HVK to work as an ESXi host. In this post I walk you through the process of installation and initial setup.
Hardware
The NUC8i7HVK is the top-of-the-line model of the NUC kits and comes with an i7-8809G processor. It ships with neither memory nor storage, so picked up the following additional components:
Dual Boot Esxi And Windows 10 Download
- 2 x Samsung 32 GB DDR4-2666, SO-DIMM (M471A4G43MB1-CTD)
- 1 x Intel SSD 660p Series 1.0 TB, M.2 80 mm (SSDPEKNW010T8x 1)
- 1 x SanDisk Ultra Fit 16 GB (SDCZ430-016G-G46)
An interesting fact to note: in the official specs, Intel mentions 32 GB as the maximum memory size. However, with 32 GB sticks now readily available and 64 GB being listed as the maximum memory size for the i7-8809G, I gave it a shot and installed 2 x 32 GB of RAM. It worked without issues.
The 16GB USB stick listed above was intended for installing ESXi onto it (and transport some BIOS update). I used an additional “throw-away” USB stick for preparing the ESXi ISO. You can find more details in the description that follows.
Unboxing
There’s not much to say. Putting in the SSD and the RAM is a straight-forward process. The “IKEA-style” manual that comes with the NUC also shows you which screws to remove. Here are some pictures:
Preparing a bootable USB stick
You can download the ISO image of ESXI 6.7 from vmware (download is available after registration).
Fun fact: The JavaScript that makes the download button work, comes from a location typically blocked by adblockers (I’m running a Pi-Hole in my network). So, if you have
tags.tiqcdn.com
on your block list, stop wondering why the download won’t start :-)To make a bootable USB stick (any you have lying around), you essentially format the stick, copy the ESXi image onto it, and create a
syslinux.cfg
. If you are on macOS and want to skip some typing, have a look at this Makefile: https://github.com/cbednarski/vmware-usb-osx.Download latest BIOS
Your NUC probably doesn’t ship with the latest BIOS, so go to Intel’s download center to get it: https://downloadcenter.intel.com/download/28953/BIOS-Update-HNKBLi70-86A-.
Then copy the BIOS onto your “good” flash drive (in my case the SanDisk stick).
First boot
Plug the USB stick with the latest BIOS on it into the NUC and boot into the “Power Button Menu”.
This menu of the NUC can be entered by pressing the power button for 3 seconds while it is in off-state (i.e. not hybernation). From the on-screen menu, it will let you pick “Update BIOS” [F7] or enter Visual BIOS [F2]. Follow the instructions and select the BIOS from the inserted USB stick.
I didn’t have a spare screen, so you are seeing it projected against my wallpaper ?
Once the update is done, shut down the NUC, then insert the prepared stick with the ESXi ISO (in addition to the SanDisk stick). Then boot the NUC again.
Boot into ESXi installer
The NUC should now boot into the ESXi installer (if it doesn’t, go back to the BIOS and manually select the boot drive).
The install itself is pretty self-explanatory (license, keyboard layout, password, …). As the installation target, select the SanDisk stick. It will be wiped and remain in the back of the NUC for good.
After the install, there are a few things you may want to setup before moving your NUC to its final place (and in my case, disconnect it from the projector :D). Under
F2 -> Configure Management Network -> IPv4
you can set a static IP, under ... -> DNS
you can set your DNS server and hostname (if you’d like to statically assign it here).Accessing the Web UI
Dual Boot Esxi And Windows 10 Without
If you followed along, you should now be able to access the web client by going to
https://<assigned ip>
. Have a quick look at the basic settings like Time & Date (e.g. set a ntp server), maybe enable SSH, maybe enter a license key (without it, it’s a 60 day trial. You should find a license key for the free version in your vmware account).Dual Boot Esxi And Windows 10 Windows 10
One last tip about the SSH access: you can access the ESXi console (the one you would see when having a display connected) by running
dcui
. To pass function keys over the SSH session, find the escape sequence for the needed key by using tput
. For example tput kf2
for F2
, which could be passed as Ctrl+[OQ
.